Loosen the upper 4 lifting screws, you can pull out the wooden knife board, and insert the corroded knife with a 22-thick backing board. The parallelism accuracy of the upper and lower plates can be adjusted without half-cutting.
The feeding device locates the material, provides tension and ensures a straight line of feeding.
High-precision servo feeding mechanism, feeding accuracy ≤0.2%. Realize waste removal work synchronized with punching, two groups
Synchronous drag rollers can ensure the proper tension when the material is discharged, which is beneficial to the smooth discharge of the waste.
Gap lifting roller dragging material: used for punching processing of automatic nesting more than two times, convenient, high-speed, high-precision, fast
Degree 260 punches/min. The openable upper roller is convenient for feeding and cleaning.
· Professional equipment for die-cutting processing industry, high precision, reliable performance, durability and safety.
· Easily realize multiple automatic punching, the punching accuracy reaches ±0.03mm.
· Realize half-cut free adjustment.
· Punching speed up to 300spm (MQ260). 260spm (MQ355).
· Hardware molds and installation are standardized, loading and adjustment are fast.
· High-efficiency and high-quality professional assembly line for processing backlight module products such as black and white glue.
· Capacity up to 10,000 pieces/hour
Punching force 120 (kN)
Punching stroke 28 (mm)
Punching speed ≤150 (times/min)/≤260 (times/min)
Mold height 115(mm)
Depth adjustment ±5(mm)
Fine adjustment method Fully automatic electric adjustment of die cutting depth
Stamping method: inching/single/continuous/engineering
Die size 350mm*355mm
Mold type Wood plastic film, corrosion engraving mold, steel mold
Material width ≤355mm
Power Motor Three-phase asynchronous motor / customized servo motor
Feeding accuracy ≤0.2% (step ≥50mm)
Feeding rubber roller PU/NBR
Feeding drive Servo motor
Lubrication Automatic lubrication system
Safety protection Three-sided light curtain + three-sided PVC protective board
Power Three-phase 380V 15A / Three-phase 380V 30A
Machine weight 3000 (kg)
Air source 0.55-0.6Mpa
Machine appearance length 1700 × width 1700 × height 1850 (mm)
Optional items: MQ355
Upper collection of waste components optional
Lower winding component optional
Mould rotating and moving components optional
Full cut conveying (active) PET optional
Follow standard die cutting device optional
Anti-scratch material adsorption device optional